Ignition WAL-L310 Par, User Manual

Page: 10 / 64

DANGER!
Risk of death from electrical current!
A short circuit can cause fires and loss of life. Always use properly insulated, tripe-core mains cable. Do not modify the mains cable. If
the insulation is damaged, immediately switch off the power supply and have it repaired. If in doubt, contact a qualified electrician.
DANGER!
Danger to life due to electric current!
A short circuit could lead to a fire hazard and risk of death. Do not modify the mains cable or the plug! In case of isolation damage,
disconnect immediately the power supply and arrange repair. If in doubt, seek advice from a qualified electrician.
DANGER!
Danger to life due to electric current!
Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts
inside. Do not use the device when covers, safety equipment or optical components are missing or damaged.
WARNING!
Risk of eye damage caused by high light intensity!
The device generates highly intense light radiation. Looking directly into the light source can damage the eyes. Never look directly
into the light source.
WARNING!
Risk of epileptic fit due to flashing lights!
The device emits flashing lights (strobe effects). Flashing lights can trigger epileptic fits in specific people. If you are at risk of epi‐
lepsy, avoid spending longer periods of time subjected to flashing lights and looking into strobing light.
WARNING!
Danger of burns on the device surface!
The surface of the device becomes very hot during operation. Skin contact can result in burns. Never touch the device with your bare
hands during operation. After switching off the device, wait for at least 15 minutes before touching it.
Safety instructions
10
WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX
LED PAR