4 / 5
T H E A T E R S P O T R O M E O
2. Lamp
Disconnect the fixture from the mains.
To exchange the lamp please drive back the mandrel. After that please open the top part of the
housing. Now exchange the lamp against one of the same type.
Please don’t touch the lamp with your bare fingers.
Fitting lamps are:
GX 9,5 650W , GX 9,5 1000W
3. Colour filters
It is strongly recommend ended you use only high temperature color filters (gel)in polycarbonate or
similar specifications material.
4. Installation
This product is fitted with a suspension stirrup rotating around the body of the product ,thus allowing
the product to be installed suspending or standing .The stirrup is fitted with a
￠
12mm clear hole for
the attachment of a hook clamp or a stand pivot. Make sure the structure you are fixing the product to
can stand the product load.
5. Maintenance
To ensure maximum performance of the product, a regular maintenance service should be carried
out . Please make sure the product is cold and disconnected from power supply when doing this.
Clean all reflective parts such as reflector and lensen (if fitted), opening the product, if necessary.
Check the lamp, the protection shields and the lenses (if fitted) and replace any visibly damaged
component .
Clean air ducts and fans (if fitted) in order to allow proper ventilation activity on the product.
Check internal and external wiring and replace any cable which should be damaged by heat damaged
component .
