Ignition TEATRO LED SPOT 100 PC, User Manual

Page: 7 / 20

7
6- IMPORTANT SAFETY INFORMATION
6.1 Fire prevention:
Replace any blown or damaged fuses only with those of identical value: T 2A 250V.
6.2 Prevention from electric shock:
High voltage is present inside the unit. Unplug the unit prior to performing any
operation which involves touching the inside of the unit.
This equipment must be grounded, do not connect to non-grounded supplies.
The use of a thermal magnetic circuit breaker is recommended for each TEATRO LED
SPOT 100 unit. Use only AC supplies 100-240V 50-60 Hz.
The unit should never be located in position exposed to rain or in areas of extreme
humidity.
A good air ventilation is essential for proper equipment work.
6.3 Safety:
Risk Group 2 product according to EN 62471.
CAUTION. Do not look directly into the light output. May be harmful to the eyes and
skin.
Do not stare at the operating light source.
The light source contained in this luminaire shall only be replaced by the manufacturer
or his service agent or a similar qualified person.
The unit is not for household use and must be installed by a qualified electrician or
experienced person.
The external surface of the unit may exeed 60°C; never handle the unit until at least 5
minutes have elapsed since the unit was turned off.
Never install the unit in an enclosed area lacking sufficient air flow.
The ambient temperature should not exeed 40°C.
6.4 Waste Electrical and Electronic equipment (WEEE) directive:
The unit, accessories and packaging should be sorted for environmetal-friendly
recycling.
For EC countries: according to the European Directive 2012/19/EC for Waste
Electrical and Electronic Equipment and its implementation into national right,
luminaires that are no longer usable must be collected separately and disposed of in
an environmentally correct manner.
!