1. Selecting the Chase Mode:
Chase Mode is indicated by
Chase
activating the Chase Mode, the Chase Program Mode starts initially and
appears in the LED display, means you are in
the mode switch can
2. Setting your desired Chase Program:
Once you have activ
to change your selected chase program. T
two digits 01
3. Selecting the Chase Speed Mode:
To adjust the Chase Speed, you must activate the Chase Speed Mode. Of course, only while in the
Chase Mode as step1, press and hold the
LED.
4. Setting your desired Chase Speed:
I
adjust the chase speed from 01 thru 99. A value of 99 will give you the fastest
(approx.1/10
30 sec
5. Selecting the Intensity (Dimming) Mode:
To adjust the output intensity, you must activate the Chase Dimmer Mode. Of course, only when in the
Chase Mode as in step 1, press and hold
the LED.
6. Setting y
Use the
000 will give you
5. Technical
POWER REQUIREMENT
POWER CONSUMPTION
LAMP
HOUSING
INGRESS PROTECTION RATING
CONTROL
OPERATING TEMPERATURE
STORAGE TEMPEARTURE
DIMENSIONS
WEIGHT
Please note:
change without any prior notice.
Selecting the Chase Mode:
Chase Mode is indicated by
Chase Mode has been activated at present, and you have also activated the Chase Program Mode. After
activating the Chase Mode, the Chase Program Mode starts initially and
appears in the LED display, means you are in
the mode switch can
Setting your desired Chase Program:
Once you have activ
to change your selected chase program. T
two digits 01-16 or only
Selecting the Chase Speed Mode:
To adjust the Chase Speed, you must activate the Chase Speed Mode. Of course, only while in the
Chase Mode as step1, press and hold the
LED. “SP” stands for the chase speed.
Setting your desired Chase Speed:
In this mode, you can adjust the program chase speed. Use the
adjust the chase speed from 01 thru 99. A value of 99 will give you the fastest
(approx.1/10
th
30 second
）
.
Selecting the Intensity (Dimming) Mode:
To adjust the output intensity, you must activate the Chase Dimmer Mode. Of course, only when in the
Chase Mode as in step 1, press and hold
the LED. “d” stands for the chase dimmer.
Setting your desired Intensity:
Use the “UP” and
000 will give you
Technical Specifications
POWER REQUIREMENT
POWER CONSUMPTION
LAMP
HOUSING
RESS PROTECTION RATING
CONTROL
ATING TEMPERATURE
TORAGE TEMPEARTURE
DIMENSIONS
WEIGHT
Please note: Specifications and improvements in the design of this product and this manual are subject to
change without any prior notice.
Selecting the Chase Mode:
Chase Mode is indicated by
Mode has been activated at present, and you have also activated the Chase Program Mode. After
activating the Chase Mode, the Chase Program Mode starts initially and
appears in the LED display, means you are in
the mode switch can immediate
Setting your desired Chase Program:
Once you have activated the Chase Mode as in step1, you can use
to change your selected chase program. T
16 or only “AUTO
Selecting the Chase Speed Mode:
To adjust the Chase Speed, you must activate the Chase Speed Mode. Of course, only while in the
Chase Mode as step1, press and hold the
stands for the chase speed.
Setting your desired Chase Speed:
n this mode, you can adjust the program chase speed. Use the
adjust the chase speed from 01 thru 99. A value of 99 will give you the fastest
th
of a second). While a set value of 01 will give you the slowest chase speed
Selecting the Intensity (Dimming) Mode:
To adjust the output intensity, you must activate the Chase Dimmer Mode. Of course, only when in the
Chase Mode as in step 1, press and hold
stands for the chase dimmer.
our desired Intensity:
and “DOWN”
000 will give you the weakest output intensity and a set value of 100 will give you the full intensity.
Specifications
POWER REQUIREMENT
POWER CONSUMPTION
LAMP
HOUSING
RESS PROTECTION RATING
CONTROL
ATING TEMPERATURE
TORAGE TEMPEARTURE -
DIMENSIONS 1256(L) x60(W) x135(H)mm
WEIGHT
Specifications and improvements in the design of this product and this manual are subject to
change without any prior notice.
Selecting the Chase Mode:
Chase Mode is indicated by “P” followed by two digits.
Mode has been activated at present, and you have also activated the Chase Program Mode. After
activating the Chase Mode, the Chase Program Mode starts initially and
appears in the LED display, means you are in
immediately realize on your fingertips by tapping the
Setting your desired Chase Program:
ated the Chase Mode as in step1, you can use
to change your selected chase program. T
AUTO” & “FULL”
Selecting the Chase Speed Mode:
To adjust the Chase Speed, you must activate the Chase Speed Mode. Of course, only while in the
Chase Mode as step1, press and hold the
stands for the chase speed.
Setting your desired Chase Speed:
n this mode, you can adjust the program chase speed. Use the
adjust the chase speed from 01 thru 99. A value of 99 will give you the fastest
of a second). While a set value of 01 will give you the slowest chase speed
Selecting the Intensity (Dimming) Mode:
To adjust the output intensity, you must activate the Chase Dimmer Mode. Of course, only when in the
Chase Mode as in step 1, press and hold
stands for the chase dimmer.
our desired Intensity:
arrow buttons to
weakest output intensity and a set value of 100 will give you the full intensity.
Specifications:
POWER REQUIREMENT
AC230V,50Hz
POWER CONSUMPTION
750W
10*Gu10 230V/75W
Metal shell with power finishing
RESS PROTECTION RATING
IP20
DMX-
ATING TEMPERATURE
0 degC to +
-20degC TO +70 degC
1256(L) x60(W) x135(H)mm
6kgs
Specifications and improvements in the design of this product and this manual are subject to
6 / 8
followed by two digits.
Mode has been activated at present, and you have also activated the Chase Program Mode. After
activating the Chase Mode, the Chase Program Mode starts initially and
appears in the LED display, means you are in the DMX mode.
ly realize on your fingertips by tapping the
ated the Chase Mode as in step1, you can use
to change your selected chase program. The chase pattern is displayed in the
” appears. You can select any of
To adjust the Chase Speed, you must activate the Chase Speed Mode. Of course, only while in the
Chase Mode as step1, press and hold the “MENU” button until
n this mode, you can adjust the program chase speed. Use the
adjust the chase speed from 01 thru 99. A value of 99 will give you the fastest
of a second). While a set value of 01 will give you the slowest chase speed
Selecting the Intensity (Dimming) Mode:
To adjust the output intensity, you must activate the Chase Dimmer Mode. Of course, only when in the
Chase Mode as in step 1, press and hold the “MENU”
stands for the chase dimmer.
arrow buttons to adjust the
weakest output intensity and a set value of 100 will give you the full intensity.
AC230V,50Hz
750W
10*Gu10 230V/75W
Metal shell with power finishing
-512 (1990)
0 degC to +55 degC
20degC TO +70 degC
1256(L) x60(W) x135(H)mm
Specifications and improvements in the design of this product and this manual are subject to
S T R I P B L I N D E R T W I S T
followed by two digits. “P” stands for C
Mode has been activated at present, and you have also activated the Chase Program Mode. After
activating the Chase Mode, the Chase Program Mode starts initially and
DMX mode. “A” stands for DMX address. Of course,
ly realize on your fingertips by tapping the
ated the Chase Mode as in step1, you can use the
e chase pattern is displayed in the
appears. You can select any of
To adjust the Chase Speed, you must activate the Chase Speed Mode. Of course, only while in the
button until “SP”
n this mode, you can adjust the program chase speed. Use the “UP
adjust the chase speed from 01 thru 99. A value of 99 will give you the fastest
of a second). While a set value of 01 will give you the slowest chase speed
To adjust the output intensity, you must activate the Chase Dimmer Mode. Of course, only when in the
button until “d
the light output intensity from 000
weakest output intensity and a set value of 100 will give you the full intensity.
10*Gu10 230V/75W
Metal shell with power finishing
degC
1256(L) x60(W) x135(H)mm
Specifications and improvements in the design of this product and this manual are subject to
S T R I P B L I N D E R T W I S T
stands for Chase program and means the
Mode has been activated at present, and you have also activated the Chase Program Mode. After
activating the Chase Mode, the Chase Program Mode starts initially and is the default se
stands for DMX address. Of course,
ly realize on your fingertips by tapping the “MODE
the “UP” and “
e chase pattern is displayed in the LED by “
appears. You can select any of them to run at a
To adjust the Chase Speed, you must activate the Chase Speed Mode. Of course, only while in the
followed by two digits appears in the
UP” and “DOWN
adjust the chase speed from 01 thru 99. A value of 99 will give you the fastest chased
of a second). While a set value of 01 will give you the slowest chase speed
To adjust the output intensity, you must activate the Chase Dimmer Mode. Of course, only when in the
d” followed by three digits appears in
output intensity from 000
weakest output intensity and a set value of 100 will give you the full intensity.
Specifications and improvements in the design of this product and this manual are subject to
S T R I P B L I N D E R T W I S T
ase program and means the
Mode has been activated at present, and you have also activated the Chase Program Mode. After
default setting. If
stands for DMX address. Of course,
MODE” button.
“DOWN” arrow button
LED by “P” followed by
to run at a single
To adjust the Chase Speed, you must activate the Chase Speed Mode. Of course, only while in the
followed by two digits appears in the
DOWN” arrow buttons to
chased speed
of a second). While a set value of 01 will give you the slowest chase speed
（
once every
To adjust the output intensity, you must activate the Chase Dimmer Mode. Of course, only when in the
followed by three digits appears in
output intensity from 000-100. A set value of
weakest output intensity and a set value of 100 will give you the full intensity.
Specifications and improvements in the design of this product and this manual are subject to
S T R I P B L I N D E R T W I S T
ase program and means the
Mode has been activated at present, and you have also activated the Chase Program Mode. After
tting. If “A”
stands for DMX address. Of course,
arrow button
followed by
single time.
To adjust the Chase Speed, you must activate the Chase Speed Mode. Of course, only while in the
followed by two digits appears in the
arrow buttons to
once every
To adjust the output intensity, you must activate the Chase Dimmer Mode. Of course, only when in the
followed by three digits appears in
100. A set value of
weakest output intensity and a set value of 100 will give you the full intensity.
Specifications and improvements in the design of this product and this manual are subject to