6
Operating
Connect the device to the power grid. The device is immediately operational.
Automatic operation can only be activated when the unit is operating alone or as master in a
master / slave combination. This setting is only relevant if the device is not controlled via DMX
or ArtNet.
Press
[MENU]
and use the buttons
[UP]
and
[DOWN]
to select the
‘Auto Mode’
option. Confirm
with
[ENTER]
to open the ‘Auto Mode’ menu.
Here you can activate one of 30 available show programmes and set the programme speed.
Use the buttons
[UP]
and
[DOWN]
to select the desired option and confirm with
[ENTER]
. Adjust
the displayed value with
[UP]
and
[DOWN]
and press Enter to confirm each new setting.
[ENTER]
.
With
[MENU]
you return to the previous menu level.
Operating mode Auto
Operating
26
Stagepix Brain IP
controller
Summary of Contents for Stagepix Brain IP
