Ignition Pure UV 710, User Manual

Page: 32 / 52

Press the button [MENU] . Press one of the arrow buttons repeatedly until the display shows
‘Stand Alone’ . Press [ENTER] . Now you can set the intensity of the LEDs and the strobe effect.
Press one of the arrow buttons repeatedly until the display shows ‘Static’ . Press [ENTER] . Press
one of the arrow buttons repeatedly until the display shows the desired submenu and press
[ENTER] . The following table shows the sub menus and setting options.
Menu level 2 Menu level 3 Function
‘Static’ ‘Dimmer 000…255’ Intensity of LEDs from 0 to
100%
‘Dimmer Fine 000…255’ Fine adjustment for the
intensity of the LEDs from 0
to 100%
‘Strobe 000…255’ Strobe effect from slow to
fast
Press one of the arrow buttons repeatedly until the display shows the desired value. Press
[ENTER] to confirm the selection.
This setting is only relevant if the device is not controlled via DMX. The device can operate in
stand-alone mode or control connected devices of the same type, that must be configured as
slaves.
Operating mode "Stand Alone"
Operating
32
Pure UV 710
LED PAR