4 / 9
PI C O I R/ W I RELESS
Important:
Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not accept liability for any resulting defects or
problems. Make sure the electrical connection is carried out by qualified
personnel. All electrical and mechanical connections have to be carried out
according to the European safety standards.
-
Before using: Make sure that there are no external damages.
-
The minimum distance to flammable objects is 0,2m
-
For vertical operation, the equipment complies with IP63 standard.
-
There can be a maximum housing-temperature of t
c
=45°C.
-
Don´t plug an audio or DMX device to the XLR plug. It can cause permanent damages of the
devices.
-
Because of is lead gel battery you are not allowed to dispose it of in household waste.
-
This battery is a high-quality product with approval of medical devices.
-
The „Amptown“-Flightcase (optional) corresponds to the IP20 standard.
Important:
Every 3 weeks should be a regeneration charging to take place to avoid damaging the
battery.
2. Commissioning
Push the ON button on the IR remote control. The unit turns on and is ready for operation.
2.1. Charging
Connect the LED headlamp with the included power supply
In the event you have bought a “Tourpack”
you can connect the device with pre-installed XLR connectors.
While charging the LED headlamp should be turned off, otherwise there can be no sufficient charge.
The loading process can take up to 10 hours, depending on the remaining charge of the battery.
If you turn the switch on the charging rail you can see the state of charge for every battery (only
possible with the “Tourpack”).
