Ignition Cobalt X-3 Coupe, Manual

Page: 10 / 32

5.2. Structure of the menu
Menu Submenu 1 Submenu 2
Set Up
DMX
Address 001
Channel
Mode
Mode 1
1
Mode 2
1
Mode 3
1
Fixture ID
0001
Information
Fixture
Times xxxxh xxm
Lamp Times
Lamp on
Times
Lamp Strike xxxx
Reset Lamp
Time
Error List
Diagnosis
BOARD 1:
xx.xx %
BOARD 2:
xx.xx %
BOARD 3:
xx.xx %
Fans Monitor
HFan1 Spd:
xxxx (r/m)
HFan2 Spd:
xxxx (r/m)
LFan1 Spd:
xxxx (r/m)
LFan2 Spd:
xxxx (r/m)
DMX Values Ch1
Personality
Lamp
Power ON
Light
Light by DMX
Lamp ON
Delay
Pan/Tilt
Pan Reverse
Tilt Reverse
Feedback
DMX Input
Wired Input
Wireless
10 / 32
Structure of the menu
Submenu 2 Submenu 3 Function
001 – 497
Set the DMX address.
Mode 1
1 - 24
Choose a DMX mode.
Mode 2
1 - 24
Mode 3
1 – 16
0001 – xxxx Set the ID for the device. For this
you have to enter a password
(1702).
xxxxh xxm
Shows the fixture hours
Lamp on
Times xxxxh xxm
Shows the lamp hours
xxxx Shows the lamp strikes.
Reset the lamp hours
If an error occurs the error
message is shown here.
BOARD 1:
xx.xx %
Shows the capacity.
BOARD 2:
xx.xx %
BOARD 3:
xx.xx %
HFan1 Spd:
xxxx (r/m)
Shows the speed of the fans
HFan2 Spd:
xxxx (r/m)
LFan1 Spd:
xxxx (r/m)
LFan2 Spd:
xxxx (r/m)
Ch1 – Chxx
000 – 255 Shows the current DMX values for
the channels.
Power ON
Light
On/Off If you turn on the device the device
the lamp is directly powered on.
Light by DMX On/Off Power on the lamp by DMX.
Lamp ON
Delay
0 – 60m The lamp is powered on with the
corresponding delay.
Pan Reverse On/Off (De-)Activates the invert
Tilt Reverse On/Off (De-)Activates the invert
Feedback On/Off (De-)Activates the
Wired Input
Please choose Wired Input.
device is no wireless DMX
Wireless
Set the DMX address.
Choose a DMX mode.
Set the ID for the device. For this
you have to enter a password
Shows the fixture hours.
Shows the lamp hours.
Shows the lamp strikes.
Reset the lamp hours.
If an error occurs the error
message is shown here.
Shows the capacity.
Shows the speed of the fans.
Shows the current DMX values for
If you turn on the device the device
the lamp is directly powered on.
Power on the lamp by DMX.
The lamp is powered on with the
corresponding delay.
Activates the invert Pan.
Activates the invert Tilt.
the Feedbacks.
Wired Input. For this
device is no wireless DMX