Ignition ACL LED Par 64, User Manual

Page: 33 / 60

Mode Display Highest possible DMX address
1-channel ‘1-CH’ 512
2-channel ‘2-CH’ 511
When the DMX mode is activated, the display shows ‘Dmx In’ .
1.
Press [Mode] and use [Up] or [Down] to select the menu item ‘SLAVE’ . Confirm with
[Setup] .
2.
Use [Up] or [Down] to select the menu item ‘Yes’ and confirm with [Setup] to enable the
Slave mode.
ð
The device is now working in slave mode, i.e. it will exactly copy the movement of
the controlling master device, correct wiring provided.
To deactivate slave mode, select ‘No’ and confirm with [Setup] .
This setting is only relevant if the device is not controlled via DMX.
Slave mode
Operating
ACL LED Par 64
33
LED PAR