Ignition 486345, User Manual

Page: 16 / 44

4 Installation and starting up
Unpack and check carefully there is no transportation damage before using the unit. Keep the
equipment packaging. To fully protect the product against vibration, dust and moisture during
transportation or storage use the original packaging or your own packaging material suitable
for transport or storage, respectively.
The device has two lateral attachment lugs each with two slots for wall or ceiling mounting
(mounting hardware not included).
Make sure that the installation complies with the standards and rules that apply in your
country.
Connect the units to be controlled via suitable DMX or RJ45 data cable to the device. A max‐
imum of 30 additional DMX devices may be serially connected to each serial port.
Create all connections while the device is off. Use the shortest possible high-quality cables for
all connections. Take care when running the cables to prevent tripping hazards.
Installation and starting up
16
Stagepix Brain IP
controller