Ignition 2bright Blind 3K, User Manual

Page: 35 / 56

In this menu, you can specify the behaviour of the device when the DMX signal is interrupted.
Press
[MENU] . Press [UP] or [DOWN] repeatedly until the display shows ‘Settings’ and confirm
with [ENTER] . Use [UP] or [DOWN] to select the menu item ‘DMX Fail’ and confirm with [ENTER] .
Use [UP] or [DOWN] to select the device behaviour on DMX signal failure. The following table
shows the available options:
Menu level 2 Menu level 3 Function
‘DMX Fail’ ‘Hold’ If the DMX control fails, the last setting
is retained.
‘Blackout’ If the DMX control fails, the device is
blacked out.
‘Emergency Light’ If the DMX control fails, the emergency
Light kicks in.
Confirm the selection with [ENTER] . With [MENU] , you return to the parent menu.
To return to the parent menu without changes press [MENU] without prior confirmation.
Behaviour on DMX control
failure
Operating
2bright Profile 3K 26°
35
LED spotlight