13
C.
Program Graph:
The graphs in the PROGRAM Display are the speed profile but incline also will change during the exercise.
There are total 20 columns in the display. Without the value of TIME set, each program will last 20 minutes
that is 1 minute of each column’s interval. With the value of time set, each interval varies. For example, if
the value of time is set to 10 minutes counting down, each interval will be 10 minutes dividing by 20
intervals (10/20=0.5) that is 30 seconds.
D.
Exercising with A Specific Goal:
In any programs, user may change the values of TIME before exercising. Press “ENTER” key to select each
of them, and “SPEED + & SPEED –“ to change the value. Without changing any of the values and all are 0;
users can run as long as possible until it is turned off. Users may also put the desire TIME value to count
down. For example, TIME is set to 10 minutes, and then the treadmill will stop after 10 minutes.
E.
Pulse Rate:
There are two ways to measure your heart rate. One is using the hand-pulse sensor. Another is using
chest belt. The hand-pulse sensor is setting for the first priority. Please use both hands to gently hold
the Hand Pulse Sensors. There are 2 sensors and 2 pieces of metal part each sensor. Each hand must
gently hold both metal pieces to trigger the measuring. The pulse rate will show in the
“PULSE/INCLINE” Display. Customer also can use chest belt to measure your pulse rate.
OPERATION
1. Put the Safety key to the ON position.
After put the Safety Key to the ON position, monitor will produce two beep sounds and then the
program window will display KM or MILE and the speed window will display wheel size value. After that
the monitor will turn off all of the windows and motorize treadmill goes to flat position.
2. Press the power button.
The monitor will turn on. The program window will display ENTER WEIGHT. The time window will display
the weight value 150 Lb or 70Kg. Press the +?- button to input your weight.
3. Press ENTER to confirm your setting value.
The program window will display SELECT PROGRAM OR PRESS START.
4. Press the program button to choose your desired program 1-8 and User 1-3.
955 COMPUTER OPERATION
