www.ignisproducts.com
What’s in the box:
Fireplace Body
1pc
EB1200 Burner
2pcs
Mounting Bracket 1pc
Wall Plugs & Screws
4pcs
Control Tool
1pc
Tempered Glass (if equipped) 1pc
User’s Manual
1pc
Installation Instructions
The fireplace must only be installed on a solid wall of non combustible material.
The Villa Fireplace can be installed directly on the wall simply by mounting the
bracket and hanging the fireplace on it. For recess insatallation please follow
instructions below.
1. Unpack the fireplace and check for damage incurred in transit and missing
parts make sure to remove the mounting bracket prior to discarding the box.
2. Cut the opening in the wall according to sizes on
Diagram 1
. Your finished
opening should be 4 inches wider and 3 inches higher then back of the fire-
place structure (including burners hanging from the bottom of the fireplace)
- refer to
Diagram 2
. This allows for faster installation and the added space
allots for air circulation and provides an escape for the hot air.
3. The depth of the finished opening should be no greater then 6-1/2 inches, but
could be less.
4. Inside walls of the recess opening should be made of or lined with a fireproof
material such as cement board, wonder board, steel sheet. Use metal studs
for framing.
5. Install the bracket 4-1/2 inches below the top of the opening and evenly
centered. You want to leave at least 1 inch above the insert to the top of the
opening.
6. Insert fireplace into opening closer to the left side. Align bracket on the back
of the fireplace to the top of the bracket mounted on the wall and slide to the
right to lock in place.
7. Place the burners into the burning chamber of the fireplace body.
IGNIS
