Manual to iPixel v3.
Available for the firmware version 3.0.5 and further.
Control elements.
The device has three control buttons for navigation: “UP”, “DOWN”, “PLAY/STOP”.
“UP” and “DOWN” buttons navigate over the menu, shift images in single image mod
e. Besides,
keeping the “DOWN” button pressed in play mode puts the device into performance preparation mode.
Operating conditions.
The device can be in following conditions:
▪
Turned off;
▪
Being charged;
▪
Menu (sequences or single images);
▪
Battery level indication. Battery level should be considered as a relative one, for it depends on a
displayed image and a battery condition;
▪
Preparation for performance;
▪
Play in performance mode.
If the battery level is low, the device automatically shuts itself down to avoid deep discharge. Inactive,
the device shut itself down as well:
▪
in a menu or battery level indication
–
after 10 minutes;
▪
in timeline mode or single image mode
–
after 20 minutes;
▪
in performance preparation mode
–
after 1 hour
In performance mode the automatic shutdown doesn't occur.
Button operation.
Initially the device is turned off. To turn it on press and hold the “PLAY/STOP” button for 1 second.
LEDs
successively light up from the bottom up. After the device is on, it goes into menu indication mode.
