12
Attention: When carrying out the following operations it
is advisable to wear protective gloves. These instructions
should be carefully followed both to prevent injury and in
order not to damage the oven door and hinges.
How to remove the oven door:
1. Open the oven door fully (see fig. 1).
2. Lift the two catches and push them forwards as far as they
go (see fig. 2).
3. Remove the door by closing it partially and pulling it
upwards (see fig. 3).
Pay attention to the hinges when cleaning and/or removing the
door (fig. 4).
To remount the door:
1. Insert the hinges into their grooves and lower the door
fully.
2. Lower the two catches.
3. Close the oven door fully.
Attention: These instructions should be carefully followed both
to prevent injury and in order not to damage the oven door and
hinges.
Changing the rear oven lamp bulb:
1. Disconnect the oven from the electrical supply.
2. Let the oven cool before turning the lamp cover left to
unscrew it (see fig. 5).
3. Change the bulb (see note).
4. Screw the lamp cover back on.
5. Reconnect the oven to the electrical supply.
Note: use only 25 W/230 V, E-14 type, T300°C bulbs
available from After Sales Service.
IMPORTANT: Do not use the oven until the lamp cover
has been repositioned.
1
2
3
5
4
