EXTINGUISHING & BREAK DOWN
PERFORMANCE PROMISE
TO DISCONTINUE USE:
1.
Turn Flame Adjustment Knob (Red Plastic)
Counter-Clockwise until valve is fully closed.
Flame will start to diminish within 1 minute.
2.
After flame is extinguished, rotate valve on
Propane Tank Clockwise to fully close.
3.
LET THE FIRECAN™ COOL DOWN FOR AT
LEAST 10 MINUTES BEFORE MOVING OR
REMOVING HOSE.
4.
After cool, remove Quick-Connect Socket
from FireCan™, and remove hose connector
from LP tank valve..
5.
When FireCan is cool to the touch, it is safe to
coil and place hose inside.
6.
Reconnect lid by placing lid hinge on
FireCan™ bar in an approximately 90-degree
“open” position. Rotate lid closed to engage
hinge.
7.
Engage clasp-lock, and press down firmly
until handle snaps down in closed position.
8.
Break down Quick-Snap legs for easy packing
and storage.
PERIODIC INSPECTION:
• Keep your FireCan™ out of the rain and store it
in a dry place.
• This device has been engineered to provide
the maximum amount of heat and comfort. If
you experience any signs of your propane
cylinder ‘freezing off’ or start to experience
lower flames than usual, please simply turn the
burner control setting to low for 5–10
minutes, or replace the cylinder with a full one.
• Ensure that you clean the inside and outside
of the housing of your FireCan™ by wiping down
combustion particulates with a rag after the
housing has fully cooled down.
1
2
3
4
5
6
7
FireCan™ will get VERY HOT. Do not
touch while in use or after use until
product has cooled down.
CAUTION
CAUTION
LET FIRECAN™
COOL DOWN!
WE BELIEVE PRODUCTS SHOULD WORK.
If you have a problem with an Ignik product, let us know
and we will make it right. Ignik stands behind what we
design and offer. When things are less than perfect, we
will repair, replace, or refund, whatever it takes to make
things right.
GOT QUESTIONS?
FIND OUT MORE:
If you have a comment, suggestion, or issue,
please let us know.
Contact us at:
www.ignik.com