-5-
www.igmtools.com
4. Connect the second leg sub-assembly to the top long rails.
5. Attach the lower cross braces to the legs. The longer cross braces
should sit on top of the short ones.
6. Attach a levelling foot to the bottom of each leg (not required if installing
optional caster set).
Note:
After final assembly and sander installation, adjust the nuts on the
threads as needed to level the stand.
IInstalling Drum Sander
1. There will be a small container of hardware included with your sander.
This container will include everything you need to set up your sander.
2. Open box 1 that contains the main sanding unit. Remove the cardboard
liner. Open the plastic bag enclosing the sanding unit.
3. Cut each corner of BOX 1 to fold sides flat, providing access to sanding
unit.
4. With one or two helpers, place the sanding unit on stand or bench (lift
points marked).
5. Remove the two wooden packing plates from bottom of the sanding unit
using the enclosed wrench and keep wrench for future adjustments.
NOTE:
These bolts that you just removed from the packing plates will
work as your bolts for attaching the sander or as extra bolts for future
replacement.
