-11-
www.igmtools.com
Operating instructions EN
Gear replacement instruction.
Loosen two attached screws to take off the cover.
Loosen the Hex screw to replace the gear set.
NOTE: The hub of the gear should be turned inward to
avoided possible interference.
NOTE: Optional gear set available
34/44/04/54 model speed(4+4=8)
38/48/68model speed(8+8=16)
9. Roller replacement
Notice:
cut off the power source before operation.
Loosen 2 attached M8 screws.
Replace with brand new rollers then tighten the
screws to complete the replacement.
Notice:
Confirm all the screws are locked properly
after first operation.
The rubbers have been tested by high standard QC
control and durability test.
• Its traction friction and durability is incomparable
to other brands. Please replace with Co-matic made
Roller.
10. MAINTENANCE
Notice:
Cut off the power source before operation.
Rollers:
Grease rollers and chains every 200 hours or 30 days
through fittings by using grease gun.
Chain wheel and chain should be maintained
regularly.
Recommended Grease:
• SHELL Alvania (SHELL Alvania R. 2);
• (SHELL GADUS S2 V220 2);
