23
Lock Pairing & Provisioning
In the factory mode (before pairing), the PIN to unlock is
1234567890
Test Factory PIN Unlock
a) Use the iglooworks management dashboard to send invitation of registeration to the user.
b) Create the account via the link in the invitation and login.
Register as a Admin/Owner
2
Pairing
3
4
a) Click on the 3 dashes on the top left of the screen, and select
[Pair New Lock]
.
b) Select which property you would like to pair the lock with
c) Select IoT Deadbolt
d) Follow the instruction displayed on the screen to pair the lock.
Connect to the IoT Network
You can either connect to the IoT network right after the pairing is completed or click on
the top banner on the lock’s page to initiate the network connection.
a) the lock will attempt to connect to the IoT network automatically
b) If the automatic connection is failed, you may manually set up the network parameters.
Please contact your IoT SIM card service provider for these information.
Note: please make sure you have already inserted a valid IoT SIM card to the lock.
If not, refer to point 10.
IoT Registration
Attempting to connect to
IoT network, please wait…
00:60
Pairing
NEXT
Place palm overk eypad to activate
the device.
