Igloohome IGP1, Manual

Page: 6 / 8

6

Unpaired product can be unlocked with Factory Pin code of
1234567890 (to test all buttons) followed by the Unlock Icon.

Hard Reset can be performed only when padlock is unlocked state
17. Connectivity

Bluetooth 4.2 – Bluetooth Low Energy (BLE)
18. Volume Control

Volume can be changed via Bluetooth

10 levels
19. Keypad LED Toggle

Keypad LED can be switched on or off via Bluetooth

By default, it is switched on
20. Keypad Security Lockout

Keypad Security Lockout will be triggered if Incorrect pins are
attempted for a number of consecutive times. “Keypad Security
Lockout” can only be activated when the lock is locked

User is able to Enable and disable Keypad Security Lockout via BT

User is able to configure 1 to 10 incorrect pins (default = 5)

When “Keypad Security Lockout” is triggered 1st time:

There will be siren for 30 seconds

Keypad will not accept any pin codes for 1 minute

When “Keypad Security Lockout ” is consecutively triggered 2nd time:

There will be siren for 60 seconds

Keypad will not accept any pin codes for 5 minutes

When “Keypad Security Lockout” is consecutively triggered 3rd and
subsequent times:

There will be siren for 90 seconds

Keypad will not accept any pin codes for 10 minutes

Keypad Security Lockout can be deactivated by:

After 1 / 5 / 10 minutes (depending)

Bluetooth Unlock (Master/Guest)

When “Keypad Security Lockout” is deactivated (by any method,
there will a clear Audio indicator. Refer to “Audio and LED Indications”
section for details.

During Security mode, single Flash White LED and Red LED on LED
indicator when keypad is triggered.