3
Protection from Moisture
Avoid placing the refrigerator in a place where heavy moisture is present to minimize the
possibility of oxidation or rusting of the metal pieces. The refrigerator should never be
directly sprayed with water.
Protection from Heat
Placement of the Unit
The surface on which the refrigerator will be placed must be flat and solid. It should not be laid on
any soft material such as foam, plastic, etc. The feet of the refrigerator can be adjusted to make a
solid connection with the placement surface.
Do not place the unit near any volatile combustibles such as gas, petrol, alcohol, lacquer, etc. The
above-mentioned items cannot be stored in the refrigerator.
Whether during movement or in placement, the refrigerator can not be tilted more than 45° from the
upright position nor can it be placed upside-down.
The refrigerator should be kept away from any heat source or direct sunlight.
Moving
Ventilation
Power Supply
Power Cord
For proper ventilation keep the back of the refrigerator 4 inches away from the wall. Give
the refrigerator sides 8 inches, and the overhead at least 12 inches of clearance from
obstruction.
The refrigerator can only operate using a single phase alternating current (see the rating
label). If the voltage of your power supply varies, it is recommended to utilize an A.C.
automatic voltage regulator. This refrigerator uses a 3-pronged plug with a grounding
prong and therefore must be used with a corresponding 3-slot outlet to accommodate the
grounding prong.
The cord should be neither lengthened nor folded into a coil during operation. The cord
should be kept clear of any hot surfaces near the unit's compressor. It is not recommended
that an extension cord be used with this unit. The appliance should be positioned in a
fashion that leaves the plug easily accessible.
2
.
Installation
