Igloo C3URP Series, Instruction Manual

Page: 11 / 14

REFRIGERATION LTD
Pastry Display Cases | www.igloorefrigeration.com 11
5. MAINTENANCE

Before you start Maintenance on the unit, Power it OFF.

Do not use steel wool, abrasive cleaners, bleach or cleaners containing chlorine or sodium to clean the unit.

Do not use pressure washer or water-jet to clean the unit.

The unit should be cleaned right after unpacking and before turning it on.

The unit should be cleaned with warm water and mild soap.

Make sure to cover the fan motor to prevent moisture damage.

Door gaskets, shelves and supports should be cleaned on a regular basis.

Fan blades and guards should be cleaned with a soft cloth.
5.1 Cleaning and maintenance

All maintenance services need to be performed after disconnecting the
equipment from power supply!

Protect electrical components against any damage or water spillage.

Do not use water stream to clean the equipment, only a moist cloth.

Do not use any sharp objects to remove dirt!
Do not use mechanical agents to quicken the defrosting process!
Figure 5 Manner of assembling/pulling out the blow in and suction
1 – Bottom surface
2 – Blow-in (DO NOT BLOCK the holes!!!)
3 – Suction (DO NOT BLOCK the holes!!!)