en
19
User manual Basia 2, Tobi
www.igloo.pl
3
5 3 4 2
2
1
5
6
7
11
1
10
10
2
1
8
9
5
4
Fig.5 Mounting salad tank in “Basia Gastro” display cabinet
1 – Universal salad tank (for each length of the cabinet) – used as addition in order to disassembly salad tanks and
glass side (after pulling the tank – access to glass holding downs)
2 – Module salad tank
3 – Cross-bars under GN containers (placed only in the tank (2), does not concern the universal tank (1))
4 – Anterior aluminium angle section (at the back of the body)
5 - Posterior aluminium angle section (at the front of the body)
Fig.6 Assembly of glass elements
and aluminium lamp
1 – Glass (glass side) holding down
2- Glass side
3 – Aluminium lamp
4 – Aluminium lamp hole plug
5 – Bent, front glass, lifted
6 – Upper aluminium pro
fi
le of the glass (lifted
guide)
7 – Lower aluminium pro
fi
le of the glass
(catch)
8 – Front, glass screen
9 – Front bracket
10 - Lamp conduit protection
11 – Lamp conduit
• Place the plug of the connecting cable directly in plug-in socket (it is forbidden to connect the device by means of
extension cords or dividers!)
Power sockets (optional) may be used to power cash register, weight, and similar receivers with power not
exceeding 500W!
• Turn on the main switch Fig.10/1 (p.20), which activates the temperature regulator, and then aggregate of the device
• Set the temperature on thermostat control panel Fig.10/3(p.20) (service details on p.25 or 26)
• Turn on the lighting switch Fig.10/2 (p.20)
• The
fi
rst cleaning of the device should be provide right after unpacking, and before turning it on. The unit should
be cleaned with water at a temperature not exceeding 40°C with a neutral detergent. For washing and cleaning
the equipment it is prohibited to use products containing chlorine and sodium varieties, which destroy the protecti-
ve layer and components of the device! Any residue of adhesives or silicone on metal elements should be remo-
ved only with extraction naphtha (not applicable to items made of plastic !). Do not use other organic solvents.
When cleaning the unit is prohibited to use water jet. The unit should be cleaned with a wet rag.
After installation of the device at the destination place it should be left to rest for at least 2 hours before
turning it on (for devices with built in compressor) to set the level of refrigerant in order to prevent problems
with starting up the aggregate.
WARNING: Keep out the cooling circuit from damage!
