Charge:
For the first three uses of car DVR, please charge the battery only after it is completely
used up; and keep charging it for 12h every time continuously until the battery can have the
maximal efficiency.
This device is inbuilt with rechargeable lithium battery. For the first use, please charge it in
any of the following manners:
1) Connect it to PC with USB data cable for charging.
2) To charge with a charger, connect the USB cable with the charger holder and then plug the
charger into the power supply socket.
Note: When the battery is in low power status, the car DVR will directly enter the
protected status and thus cannot be switched on. In such case, please charge it.
Use Guide:
Power On/Off and Mode Switching
1. Press the POWER key shortly to switch on the device.
2. After the device is switched on, the system will have the video mode in default. In such case,
press the OK key to start video recording and again to pause with the video file saved
automatically.
3. If it is necessary to switch the mode, in the pause state, press the MODE key to enter the picture
mode, a second time to enter audio recording mode, a third time to enter the replay mode and a
fourth time to back the video mode.
4. In the pause state, press the POWER key for 3s to power off the device.
Function Keys
Video recording / Photo/Audio recording / Playback
Menu Setup
I. Video Setup/System Setup
Press the POWER key to power on the device. In the video mode, press the MENU key to enter the
menu setup mode and press the MODE key for (Video Setup/System Setup), press the UP/DOWN key
to choose the desired item and press the OK key to confirm.
Video Setup:
1.
Video format setup: 1920*1080, 1280*720, 848*480 and 640*480 available for choice.
