3
A. PRODUCT INSTALLATION
1. Install on the non-driving side, press the flat side of the cadence to install
on the inside of the crank
.
2. Tighten the strap to bypass the crank and hook the cadence sensor.
3. Rotate the crank to check for gaps, the sensor and the straps should not touch your shoes or other parts of the bicycle.
4. Take 15 minutes for a cycling test to ensure the sensor and the strap are fastened and will not cause injury.
B. BATTERY INSTALLATION
Install the battery, knock the knob and a light flashes alternately in the middle of the front of the product. This product uses a
large capacity of CR2032 button battery; sustainable working is 260 hours (depending on usage).
C. PRODUCT MAINTENANCE
This product is a high-tech electronic device, follow the instructions below to ensure its performance stability and extend the
service life.
1. Use a soft brush to regularly scrub and clean the dirt and dust on the surface of the product.
2. When replacing the battery, please make sure that the inside of the product is dry and free of water stains.
3. Do not immerse in the water for a long time.
4. Clean regularly to ensure there are no knife marks on the strap.
Safety Precautions:
The device cannot be immersed under water. The device can be used in the temperature range from -
10°
to 50°C.
1) For household use: The given symbol (crossed-out wheeled bin) on the product or at accompanying
documents means that used electrical and electronic products should not disposed of with household waste. To
ensure proper disposal of the product, hand it over to a designated collection point, where it will be accepted
free of charge. The correct disposal of this product will help to save valuable natural resources and prevent any
potential negative impacts on the environment and human health, which could otherwise be caused by
inappropriate disposal of wastes. For more details, please, contact your local authorities or the nearest
collection point. The improper disposal of this waste can be penalized in accordance with national regulations.
Information for users to disposal of electrical and electronic devices (corporate and business use): For proper
disposal of electrical and electronic devices, ask for details from your dealer or distributor. Information for users to disposal of
electrical and electronic devices in other countries outside EU: The above mentioned symbol (crossed-out wheeled bin) is valid
only in the countries of EU. For proper disposal of electrical and electronic devices, ask for details from your authorities or
dealer. All is expressed by the symbol of crossed-out wheeled bin on product, packaging or in printed materials.
2) Set up the claim for warranty repair of device at your dealer. If you have technical questions or problems, contact your
dealer. Follow the rules for working with electrical equipment. The user may not dismantle the device or replace any part of this.
Opening or removing the covers poses the risk of electric shock. In case of incorrect reassembly and subsequent connection
you are also exposed to electric shock.
Declaration of Conformity:
Company INTELEK spol. s r.o. hereby declares that all C61=ACAD70 devices are in compliance
with essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU Declaration of
Conformity is available on this website www.iget.eu.
The warranty period of the product is 24 months, unless stated otherwise.
RoHS:
The components used in the device meet the requirements on the restriction of hazardous substances in electrical and
electronic devices in accordance with Directive 2011/65/EU. The RoHS declaration can be downloaded from www.iget.eu.
This device can be used in the following countries:
Exclusive importer/producer of iGET products to EU:
INTELEK spol. s r.o., Ericha Roučky 1291/4, 627 00 Brno -
Černovice, CZ, http://www.iget.eu, SUPPORT: http://www.iget.eu/helpdesk, Copyright © 2021 Intelek spol. s r.o., All rights
reserved.
Deutsch:
Vielen Dank, dass Sie sich für ein iGET-Produkt entschieden haben. Einzelne Parameter, die Beschreibung der Abbildungen
und das Aussehen im Handbuch können sich in der Abhängigkeit von den einzelnen Versionen und Updates unterscheiden.
Ein vollständiges und detailliertes Handbuch finden Sie unter www.iget.eu. Druckfehler vorbehalten.
A. PRODUKTINSTALLATION
1.
Installieren Sie auf der nicht fahrenden Seite und drücken Sie auf die flache Seite der Trittfrequenz, um sie auf der
Innenseite der Kurbel zu installieren
.
2. Ziehen Sie den Gurt fest, um die Kurbel zu umgehen, und haken Sie den Trittfrequenzsensor ein.
3.
Drehen Sie die Kurbel, um auf Lücken zu prüfen. Der Sensor und die Gurte dürfen Ihre Schuhe oder andere Teile des
Fahrrads nicht berühren.
4.
Nehmen Sie sich 15 Minuten Zeit für einen Fahrradtest, um sicherzustellen, dass der Sensor und der Gurt befestigt sind und
keine Verletzungen verursachen.
B. BATTERIEEINBAU
Setzen Sie den Akku ein, verriegeln Sie den Knopf und die Ampeln in der Mitte der Vorderseite des Produkts blinken
abwechselnd. Dieses Produkt verwendet eine CR2032-
Knopfbatterie mit großer Kapazität. Die nachhaltige Arbeitszeit beträgt
260 Stunden (je nach Verwendung).
C. PRODUKTHALTER
Bei diesem Produkt handelt es sich um ein elektronisches High-Tech-
Gerät. Befolgen Sie die nachstehenden
Wartungsanweisungen,
um die Leistung sicherzustellen Stabilisieren und verlängern Sie die Lebensdauer.
1.
Schrubben und reinigen Sie regelmäßig Schmutz und Staub auf der Oberfläche des Produkts mit einer weichen Bürste.
