EN
14
IV. Application of product
The product is compatible with mobile devices, equipped with microUSB connector. It is also possible to use other
cable adapters with USB2.0 connector, as e.g. for tablets, mobile phones, e-book readers and other devices
running on Android, Windows Phone, iOS systems. (Portable game consoles, MP3, MP4 music players, electronic
e-book readers, GPS navigations).
Plug & play, automatic power safe mode - if no device consume energy; the power bank shall go to sleep
automatically. (Warning: Valid only for models with Auto-sleep function.)
Power bank contains: protection against short-circuit, excessive battery charge and discharge, over current
protection, high efficiency of conversion and protection against energy leakage.
If the voltage of power bank battery is lower than the nominal voltage of charging device, this device may not be
fully charged or not charged at all.
If the output voltage of power bank battery is higher than the nominal voltage of charging device and for any reason
it is impossible to protect the recharged device, it may result in overloading and damages to the battery or device
itself.
V. Product description
1. On/OFF button.
2. Capacity indicator - pressing the power button for a few seconds will illuminate the display showing the state of
the current power bank charge.
3. 2x USB port (3a a 3b) for connection of charged device (only B-7000S, B-10000G/P - DC 5 V/1 A and 5 V/ 2.1
A).
1x USB port (3b) for connecting the charging device (only B-10000FC, DC 5 V/2.4 A, 6.5 V
– 9 V /2 A, 9 V –
12 V/1.5 A, support Quick Charge Qualcomm 3.0).
1x USB-C port (3a) for charging by charger (only B-10000FC DC 5 V/2 A).
4. microUSB port for charging via charger (DC 5 V/2 A).
The packaging includes microUSB->USB and USB-C->USB cable, power bank and manual with Warranty card.
VI. Recharge of power bank battery
1. Connect the standard USB ->microUSB/USB-C cable to PC or USB adapter, e.g. supplied with mobile phone.
2. Connect microUSB/USB-C connector to power bank. The charging begins automatically or must be actuated
using the ON/OFF button.
3. During charging, the display will light up to monitor the charging process.
Information about battery:
Model B-7000S
– Li-Pol (7 000 mAh)
Model B-10000G/P
– Li-Pol (10 000 mAh)
Model B-10000FC
– Li-Pol (10 000 mAh)
Number of charging/discharging cycles
– ≥ 500 times
Duration of charge -
B-7000S: to 5 hours
B-10000G/P: to 7 hours
B-10000FC: to 7 hours
-
duration of charge depends on used power supply adapter (output stream)
Actually usable battery capacity may vary from the indicated. The device suffers losses on the PCB, wiring and
changing the voltage of 3.7 V to 5 V output, and so on connected devices. Discharging power bank no linear
relationship.