9
3. If using the remote control, when the fan is in standby mode use the /
buttons to increase/decrease the hour displayed. To set the delayed start time
leave the hour to flash 5 times on the control panel. This will then set and
begin. The timer can be set from 0-12 hours. Please note that the delay start
time length will remain displayed on the control panel, but the fan will not
operate until the time that has been set elapses, and the fan will return the
last settings it had previously been on (Night mode and Timer functions will
not be restored).
4. If the Timer function is reset at any point during the countdown, then the
new time will be scheduled and the initial timer disregarded.
Wind Mode Function
1. When the fan is turned on for the first time, it will begin on Normal wind
mode.
2. To change the wind mode, press the Wind Mode button to scroll through
the 3 settings. The corresponding icons for Natural and Night mode
will be displayed on the control panel. Normal mode does not have an icon.
To select a mode, press the Wind Mode button once to set Natural
mode and twice to select Night mode . Press a third time to return to
Normal mode. After a few seconds in the chosen mode the fan will adapt to
the selected setting.
3. In Natural mode , there are 32 wind speeds divided into three groups,
which can be selected using the wind speed control dial or the / buttons
on the remote control:
• Low level natural wind (represented by wind speed 10 on the control panel
display)
• Medium level natural wind (represented by wind speed 20 on the control
panel display)
• High level natural wind (represented by wind speed 32 on the control panel
display)
