![background image](http://html1.mh-extra.com/html/igenix/ig9919/ig9919_user-manual_3933969013.webp)
13
Dry Mode
Ideal to reduce room humidity (spring and autumn, damp rooms rainy periods, etc).
In dry mode, the appliance should be prepared in the same way as for cool mode, with the air
exhaust hose attached to enable the moisture to be discharged outside.
To set this mode correctly:
• Press the “
” button a number of times until the Dry symbol appears. The screen display “
”.
• In this mode, fan speed is selected automatically by the appliance and cannot be set manually.
Sleep Mode
NOTE: This mode is only available when using the remote control and cannot
be controlled via the main control panel
This function is intended for using the unit night as it gradually reduces operation of the appliance.
To set this function correctly:
• Select the cool or heat mode as described above.
• Press the “ ” button.
The appliance will operate in the previously selected mode, but with reduced brightness and noise
level.
The SLEEP function maintains the room at optimum temperature without excessive fluctuations
in either temperature or humidity with silent operation. Fan speed is always at Low, while room
temperature and humidity vary gradually to ensure the most comfortable.
When in COOL mode, the selected temperature will increase by 1°C (1°F) per hour in a 2 hour
period. This new temperature will be maintained for the next 6 hours. Then the appliance turn it off.
The SLEEP function can be cancelled at any time during operation by pressing the “Sleep”, “Mode”
or “fan speed” button.
In FAN or DRY mode, SLEEP function cannot be set.
Fig.7
Fig.8
Switch the Unit of Temperature
When the appliance is running, hold on + and - button together for
3 seconds. This will change the unit of temperature.
For example:
Before change, in cool mode, the screen display will look like Fig.7.
After change, in cool mode, the screen display will look like Fig.8.