6
• Compressor less dehumidifier - uses desiccant rotor technology
• Environmentally friendly with no harmful gasses & quiet in operation
• Moisture removal - 7 litres/day (20°C RH60%)
• Water tank capacity - 3 litres
• Special silver coating within the filter - kills bacteria on contact,
improving the quality of air in your home or office
• Built-in ioniser -
• Electronic louvre
• Normal Dry and Quick Dry mode - includes power saving setting
for summer use & turbo setting for winter
• Up to 8 hour timer - for added convenience
• Temperature range for use ~ 1°C - 40°C
• Light & portable with carry handle
• Removable water tank with handle
• Operating light
FEATURES
• Place the unit in an upright position on a stable, flat surface.
• Ensure the unit is a safe distance away from a wall or furniture (minimum 20 cm from Air Inlet and
40 cm from Air Outlet)
• Please keep clothes at a safe distance of 40 cm from air outlet of the unit to prevent water dripping
into the unit.
• Where to position your dehumidifier?
Note: For best results position the dehumidifier somewhere central like a landing or a hallway. As long
as the internal doors are open, the excess moisture from all of the rooms in the house will migrate
naturally towards the dehumidifier and be processed.
OPERATING INSTRUCTIONS
Note: This dehumidifier will produce heat during operation; the room temperature may increase by
1°C to 4°C. If dehumidifier placed in a cabinet or a closed area, the temperature could rise >4°C.
• Plug in the unit to the wall socket. The unit will quietly beep once and automatically switch to
Standby mode. Ensure the water tank is installed correctly, otherwise the “FULL TANK” indicator will
light up and the unit will not work.
• Press the “ON/OFF” button and the “AUTO”, “ ” and OSCIL” indicators will light up
• Press “MODE” button to select either: AUTO, QUICK DRY, NORMAL DRY or ECO.
Auto mode: At ambient temperature of 30° below, it’ll detect the relative humidity (RH) to choose its
working status as following:
A - 70%RH above, heater is at high working status; the fan is at high speed;
B - 70%~50%RH, heater is at low working status, the fan is at medium speed;
C - 50%RH below, heater is off and stops dehumidifying but runs on fan only at low speed, if the relative
humidity rises, it dehumidifies again.
UNIT SET UP
