Operating Instructions
Before operating ensure that the dehumidifier is situated upright on a stable, flat surface with the back of the
dehumidifier a minimum of 30 cm from the wall. Windows must be closed in order to achieve maximum efficiency.
1.
Plug the appliance into a suitable power outlet.
2.
Make sure that the water tank is in the correct position. If the ‘Tank Full’ indicator illuminates, remove the
tank and replace it in the correct position ensuring that the ‘float’ lever is able to move freely.
3.
Set the desired humidity by pressing the up or down arrow buttons on the control panel until the desired
level is displayed on the LED screen. This process must be repeated each time the appliance is started.
If the humidity in the room is above the level set the dehumidifier will begin start operating.
When the humidity in
the room reaches the level set the compressor will stop operating but the fan will continue to run.
If the humidity in the room rises above the level set the compressor will automatically start working again.
PLEASE NOTE:
If when you switch on your dehumidifier and set your required level of humidity the unit does
not begin operating, it is likely that the current humidity in the room is already below this level. The dehumidifier will
begin operating once the humidity rises above the level set. The current room humidity will be displayed in the left
LED screen as indicated in the diagram on the previous page.
PLEASE NOTE:
This dehumidifier operates using a compressor similar to that of your refrigerator and also a
motorised fan therefore the unit will make noise whilst it is working. This is rated at 55dB.
Using the Timer Function
On start up the appliance will run continuously. To set the run-time of the appliance repeatedly press the Timer
button until the desired number of hours is displayed on the LED screen. Release the Timer button.
When the appliance is in Standby-by repeatedly press the Timer button to set the number of hours until the
appliance will switch on.
The timer can be set from 1 – 24 hours.
To turn the time off set the timer to 0 hours.
Defrost
When operating in temperatures less than 12°C the surface of the evaporator may accumulate frost and effect the
efficiency of the dehumidifier. When this happens that machine will go into periodic defrost mode automatically and
the indicator will be displayed on the LED screen. Do not use the dehumidifier in temperatures less than 5°C.
Should the dehumidifier freeze-up switch off the appliance, allow the temperature to rise and then restart.
Water Tank Full
When the water tank is full the dehumidifier will stop operating. Remove the water tank careful with both hands and
discard the water. Replace the water tank in the correct position. The dehumidifier will automatically begin
operating again.
