![background image](http://html1.mh-extra.com/html/igenix/ig9704/ig9704_user-manual_3917190008.webp)
8
CLEANING AND MAINTENANCE
Turn off the unit and unplug from the mains socket before cleaning or performing any maintenance.
Cleaning the Exterior
• Clean the plastic housing with a duster or a soft damp cloth. Do not use chemical or abrasive
cleaners to clean the exterior of the unit to prevent damage to the finish
Cleaning the Filter
• It is recommended that the air filter is cleaned every 4 weeks. If the air filter is blocked with dust,
the unit’s performance will be significantly affected.
• Located at the top of the filter, you will notice two release clips; Pull the clips gently towards you
and then lift upwards to release the filter from the appliance
• Use a vacuum cleaner or tap the filter lightly to remove loose dust and dirt. If necessary you can
wash the filter by immersing them in lukewarm water with a neutral detergent.
Note: Extreme care should be taken when cleaning the filters as they are very delicate.
• Gentle rinse and then dry thoroughly before re-installing the filter
Important: Do not run the unit without filter
Cooling Pad
Cooling Pad Bracket
Filter
Filter Release Clips
To Empty the Water Tank
• Switch off and unplug the appliance from the power socket
• Move the appliance to a suitable location near to a sink or drainage point
• Gently slide the water tank drawer out of the back of the appliance
• Place a suitably sized container underneath the drainage plug of the water tank
• Remove the drainage plug and drain the tank completely, use a dry cloth to wipe away any
excess water which is hard to drain from the tank
• Re-install the drainage plug and slide water tank drawer back into the appliance
• Ensure that the Water Tank is empty – following the instructions above
• Clean the filter
• To protect the unit against dust, cover and store in a dry place, not accessible by children
End of Season Maintenance