![background image](http://html2.mh-extra.com/html/igenix/ig9508/ig9508_instructions-for-use_4948809003.webp)
3
IMPORTANT
When the heater is in use, it should always be kept vertical (handle should be at the top). Putting the heater in any
other position could be dangerous and cause a potential fire hazard.
Assembly
You will need to assemble the heater and the feet together
The heater has 2 feet that slot into the back of the heater.
Make sure both feet are securely in before switching the heater on
Make sure the heater is balanced correctly on a solid flat surface
Location of the Heater
The heater should be positioned where you most need the warmth.
Do not locate the heater underneath a fixed power point.
Always ensure that the heater is placed at least 50cm away from furniture, curtains, walls etc.
Plugging in the Heater
Before plugging the heater into the mains, ensure that your supply voltage is the same as what is shown on the
rating plate of the heater. Try to avoid contact between the heater and clothes, household linen, furniture,
inflammable material and the power socket.
Turning on and Using the Heater
1. Insert the plug into a suitable socket ensuring the lead is neither near the heat source nor a tripping hazard
2. Switch the heater on and off by the 2 switches located at the bottom right hand corner of the heater.
3. Each switch operates one element.
IG9508
– 800W Halogen Heater
Halogen Heater at a glance
1- Body frame
2- Element 1 switch
3- Element 2 switch
4- Halogen elements
5- Protective wire mesh
1.
5.
2.
3.
4.