background image

4

•  Do not use the appliance if the power cord or plug is damaged. Do 

not replace the power cord or any other parts yourself.

•  The appliance should not be used if it has been dropped or if there are 

visible signs of damage.

•  This appliance is for household indoor use only. Never use it outdoors.
•  Before moving or attempting to clean the appliance, unplug and allow 

it to cool down completely.

•  The appliance should not be placed directly in front of or below a 

fixed power socket.

•  The use of an extension lead is not recommended, as overheating of 

the extension lead may occur during appliance operation.

•  This appliance is specifically designed to be wall-mounted, and should 

not be used as a freestanding appliance.

•  The appliance must be used with the warm air vent facing downwards.
•  No part of this appliance (except the pull cord) should be touched 

with wet hands, or by persons in the bath or shower.

•  Do not install this appliance on a flammable surface.
•  Before drilling holes for installation of this appliance, check that there 

are no pipes or cables hidden behind the wall.

•  When mounting this appliance, ensure that the unit is securely fixed to 

a strong wall and it is safely connected to a mains socket.

•  Ensure the mains lead is kept away from the hot body of the appliance.
•  Do not cover or obstruct any of the heat outlet or air intake grilles of 

the appliance.

•  Do not insert objects through the heat outlet or air intake grilles of 

the appliance.

•  Do not use the appliance in areas where flammable liquids are stored 

or where flammable fumes may be present.

•  When the appliance is turned on for the first time, or after having 

being unused for a long period, the unit may emit a strong smell. This is 
normal and will disappear after a short while.

Summary of Contents for IG9041

















Reviews: