![background image](http://html1.mh-extra.com/html/igenix/ig7251/ig7251_user-manual_3943342005.webp)
5
1. Base
2. Water gauge
3. Body
4. Spout
5. Lid
6. Lid Button
7. Handle
8. On/Off Switch
APPLIANCE OVERVIEW
OPERATING INSTRUCTIONS
Before using your kettle
If you are using the kettle for the first time, it is recommended that you should clean your kettle before
use by boiling the max capacity of water once and then discarding the water.
Wipe the surface with damp cloth.
Note: The max capacity of kettle is 1.7L.
Using your kettle
1. Place the unit on the level surface.
2. To fill the kettle, remove it from the power base and open the lid by pressing the lid release button,
fill with the desired amount of water, and then close the lid.
Alternatively, the kettle may be filled through the spout. The water level should not exceed MAX
mark or sit below MIN level. Too little water will cause the kettle to switch off before the water
has boiled.
Note: Do not fill the water over the maximum level, as water may spill out of the spout when boiling.
Ensure that the lid is firmly in place before plugging in the power outlet.
3. Position the kettle on the power base.
4. Connect the plug into a power outlet. Press down the On/Off switch, the indicator will light up.
Then the kettle will start to boil the water, once the water has boiled the On/Off switch will turn off
automatically. You can shut off the power by lifting the On/Off switch at any moment during boiling
water. If you want to boil water again, only press down the On/Off switch to restart the kettle.
Note: Ensure that the On/Off switch is free from obstruction and the lid is firmly closed, the kettle will
not turn off if the switch is constrained or if the lid is open.
5. Lift the kettle from the power base and then pour the water.
Note: Operate carefully when pouring the water from your kettle as boiling water may result in severe
burns. Do not open the lid while the water in the kettle is hot.
6. The kettle will not re-boil until the On/Off switch is pressed down again. The kettle may be stored on
the power base when not in use.
Note: Always disconnect the power supply when not use.
1.
3.
4.
5.
2.
8.
6.
7.