iGenix IG3960 Instructions For Use Manual Download Page 6

 

Before using your Refrigerator 
 
Before placing food in the refrigerator, it needs to be cleaned by wiping the interior using warm water and a 

soft cloth. Wipe the refrigerator completely dry before replacing any shelves or salad drawers. 

 

Check that you your power outlet is compatible with the plug supplied with the refrigerator. 

 

IMPORTANT: Always allow at least 12 hours before turning on the refrigerator to allow the coolant fluid time 

to settle after the refrigerator is in place. Failure to do this may result in damage to the appliance and such 

damage is not covered by the guarantee. 

 

Before placing any food in the refrigerator it is recommended to leave it 24 hours. This allows you to ensure 

the refrigerator is working correctly and gives enough time to allow the temperature in the refrigerator to drop 

to the correct level. 

 
Using your Refrigerator 

 

 

Before  turning  on  the  refrigerator,  make  sure  that  the  temperature  control  which  is  located  inside  the 

refrigerator is set between 3 and 4. This is the correct setting to use in a room with an average ambient 

temperature. 

 

Wait 24 hours before placing food in the refrigerator to allow the temperature to fall to the correct level. 

 

Adjusting the Temperature 

 

The ideal internal temperature of your refrigerator should be between ±0˚C to +5˚C. This is controlled by the 

temperature  control  located  on  the  internal  right  hand  side  of  the  refrigerator.  There  are  8  settings  on  the 

temperature  control,  with  position  7  being  the  coldest  setting,  position  1  being  the  warmest  setting  and 

position 0 being the off position.  

 

The temperature control should be set between 3 and 4 initially and adjusted to achieve the correct setting 

for  your  environment.  Avoid  setting  the  thermostat  too  high,  as  this  may  reduce  the  temperature  to  a  point 

where some food begins to freeze. If this happens turn down the thermostat slightly. 

 

The  temperature  in  the  fridge  compartment  can  be  monitored  by  using  a  Fridge  Freezer  Thermometer.  Do 

not use a Mercury filled thermometer, as a breakage would cause a health hazard. 

 

Your  fridge  must  NOT  be  placed  in  a  room  where  the  temperature  goes  below  18˚C  or  above  38˚C  for 

prolonged periods, as the internal fridge temperature will not be maintained. 

 

Using your Fridge Efficiently 

 

 

Take note of foods best before / use by instructions and follow the maximum storage guidelines on the 

packaging. 

 

Keep  foods  covered  to  help  retain  moisture  and  to  help  prevent  odour  /  flavour  transference.  Plastic 

bags, aluminium foil, plastic food wrap and containers with lids are ideal. 

 

Avoid opening the door for long periods or unnecessarily. 

 

Allow  hot  or  warm  food  to  cool  down  in  covered  containers  before  placing  in  the  fridge.  Hot  food  will 

raise the temperature in the fridge and cause the compressor to work more. 

 

 

 

 

Summary of Contents for IG3960













Reviews: