7
FUSE REPLACEMENT
Problem
Possible Cause
Solution
The toaster does not work.
Not properly plugged into the mains
wall socket.
Plug in firmly.
The toaster smokes when
it is used.
The protective film is burning off the
elements.
This is perfectly normal and will
stop with use.
The toaster carriage lever
won’t stay down.
The toaster is not plugged into the
electrical supply.
Plug the toaster into power
socket and switch on.
TROUBLE SHOOTING GUIDE
If you are having problems with your toaster, please use our troubleshooting guide below. If you are
unable to resolve the issue using the guide please ring our Customer Service Department on
01473 271 272. Please have the model code, batch number and purchase information available.
The toaster is not browning
the toast enough.
The browning control is set too low.
Turn up the Browning Control
to a higher number.
The bread you are using is fresh and
therefore contains more moisture.
Turn up the Browning Control
as fresh bread takes longer to
toast than bread that is 1 or 2
days old.
No electricity in the mains wall socket.
Check fuse or breaker.
Crumb tray is full and needs emptying.
Empty the crumb tray regularly.
The toaster is burning the
bread.
The Browning Control is set too high.
Turn the Browning Control to
a lower setting.
Fuse Cover
Fuse Replacement (Class I)
This appliance must be eathed. Remove the fuse cover with a small
flat head screw driver. Take out the fuse and replace with a new fuse
of the same Amp. Replace the fuse cover and push back into place.
Summary of Contents for IG3011
Page 9: ...9...
