11
Levelling the Unit
To do this adjust the two levelling feet at the front
of the unit.
If the unit is not level, the doors and magnetic seal
alignments will not be covered properly
Positioning
Install this appliance in a location where the ambient temperature corresponds to the
climate class indicated on the rating plate of the appliance:
Ambient Room Temperature Limits
Class
Symbol
Ambient average temperature °C
Extended temperature
SN
+10 to +32
Temperature
N
+16 to +32
Subtropical
ST
+16 to +38
Tropical
T
+16 to +43
Location
The appliance should be installed well away from sources of heat such as radiators,
boilers, direct sunlight etc. Ensure that air can circulate freely around the back of the
cabinet. To ensure best performance, if the appliance is positioned below an overhanging
wall unit, the minimum distance between the top of the cabinet and the wall unit must
be at least 50 mm. Ideally, however, the appliance should not be positioned below
overhanging wall units. Accurate leveling is ensured by one or more adjustable feet at the
base of the cabinet.
This refrigerating appliance is not intended to be used as a built-in appliance;
Warning! It must be possible to disconnect the appliance from the mains
power supply; the plug must therefore be easily accessible after installation.