iGenix IG255W User Manual Download Page 3

3

•  Ensure that the electricity supply in your home is rated at 220 - 

240 volts before operating the appliance.

•  Do not use the appliance if there is any damage to the power 

cord.

•  Use of an extension cord is not recommended with this product.
•  This product is for indoor use only.
•  Keep packaging material out of the reach of children! It can 

become a choking or suffocation hazard.

•  Always unplug the appliance before attempting to move it.
•  Children should be supervised to ensure that they do not play 

with the appliance.

•  Ensure that the refrigerant circuit is not damaged.
•  The refrigerant of this product is R600a which is flammable.
•  Ensure when moving the appliance or during installation that the 

cooling system does not get damaged.

•  DANGER: Risk of child entrapment 

- Before you dispose of your old refrigerator or freezer, remove 
the doors and leave the shelves in place so that children cannot 
easily climb inside.

•  When disposing of the appliance, remove the plug so the 

appliance is unusable.

IMPORTANT: 

 Always allow 12 hours before turning on the 

refrigerator to allow the coolant gases time to settle after the 
refrigerator is in place.

Packaging:

  The cardboard packaging is recyclable and 

should be disposed of according to local 
regulations. Keep the packaging materials out of the reach of 
children. 

Before installation take care to remove all cardboard or other 
packaging, including material from the condenser tubes and any 
material surrounding the motor / compressor unit.

Summary of Contents for IG255W














Reviews: