6
The power levels can be classified as follows:
Power Setting
Output Level
Low
17%
M. Low – Defrost
33%
Med
55%
M. High
77%
High
100%
Cleaning and Care
1. Turn off the oven and remove the power plug from the wall socket before cleaning.
2. Keep the inside of the oven clean. When food splatters or spilled liquids adhere to oven walls, wipe with
a damp cloth. Mild detergent may be used if oven gets very dirty. Avoid using spray and other harsh
cleaners as they may stain, streak or dull the door surface. Abrasive cleaning pads can damage the door
surface which my result in the glass shattering.
3. Do not allow the control panel to become wet. Clean with a soft, damp cloth. When cleaning the control
panel, leave oven door open to prevent oven from accidentally turning on.
4. The oven should be cleaned regularly and any food deposits removed. Failure to maintain the oven in a
clean condition could lead to deterioration of the surface that could adversely affect the life of the
appliance and possibly result in a hazardous situation.
Earthing Instructions
This appliance must be earthed. In the event of an electrical short circuit, earthing reduces the risk of
electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord
having an earthing wire and with an earthing plug. The plug must be plugged into an outlet that is properly
installed and earthed.
WARNING: Improper use of the earthing plug can result in a risk of electric shock. Consult a qualified
electrician if the earthing instructions are not completely understood or if doubt exists as to whether the
appliance is properly earthed. If it is necessary to use an extension cord, use only a 3 wire extension cord
that has a 3 blade earthing plug and a 3 slot receptacle that will accept the plug on the appliance. The
marked rating of the extension cord should be equal to or greater than the electrical rating of the appliance.
Ensure that the extension cord cable does not over hang the counter top.
IMPORTANT
You should only plug the appliance into a 230V – 240V ~50Hz supply. Connecting it to other power sources
may damage the appliance.
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows: The earth wire which is coloured green &
yellow must be connected to the terminal in the plug which is marked with the letter ‘E’ or by the earth
symbol or by green & yellow.
The neutral wire which is coloured blue must be connected to the terminal which is marked with the letter ‘N’
or coloured black.
The live wire which is coloured brown must be connected to the terminal which is marked with the letter ‘L’ or
coloured red.