Model: IG1703
Operating Instructions – Manual Microwave
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USE
DO NOT use in a bathroom or outdoors.
DO NOT allow the Microwave or its lead to be submerged in water.
DO NOT operate the Microwave on any metal surface.
DO NOT leave the Microwave unattended whilst in use.
DO NOT allow children or the infirm to use the Microwave.
DO NOT cover ventilation slots of the microwave oven.
DO NOT heat flammable objects such as paper, wood or clothing. Remove packaging from ready made meals in accordance with
instructions.
DO NOT place metallic objects in the microwave oven e.g. metal containers ,crockery with metallic finish or trimming, knives,
forks, spoons or skewers.
DO NOT heat airtight objects e.g sealed containers such as bottles, jars and containers or foods such as eggs, nuts and unpeeled
fruit and vegetables.
TAKE CARE when heating liquids or baby foods. Allow at least 20 seconds settling time for temperature to equalise.
ALWAYS follow cooking instructions when Microwaving food.
ALWAYS ensure that the power lead is properly connected.
ALWAYS unplug the Microwave before cleaning.
IMPORTANT – If the mains lead of this appliance becomes damaged then it must be replaced by the manufacturer’s service
agent, or a suitably qualified person using the same rated cable in order to avoid a hazard.
THERE ARE NO USER SERVICEABLE PARTS INSIDE AND THE CASING SHOULD NOT BE OPENED BY AN UNQUALIFIED
PERSON
THIS MICROWAVE IS FOR DOMESTIC USE ONLY
Electrical Connection
Ensure your supply is rated at 220~240v and 50/60Hz before operating the appliance. This Microwave is fitted with a
rewirable plug incorporating a 13amp fuse. In addition this appliance must be earthed or connected to an earthed
supply. In the event of the fuse needing replacement then a 13amp fuse approved by ASTA to BS1362 MUST be
used.
IMPORTANT: If the plug fitted is not suitable for your socket, then the 13amp plug supplied should be removed.
Before wiring the appropriate plug, please note that the wires in this mains lead are coloured in accordance with the
following code:
BLUE: Neutral
BROWN: Live
GREEN & YELLOW: Earth
As the colours in the mains lead may not correspond to the coloured markings in your plug, proceed as follows:
Connect the BROWN wire to the terminal marked ‘L’ or coloured RED, connect the BLUE wire to the terminal marked
‘N’ or coloured BLACK, and connect the GREEN & YELLOW wire to the terminal marked ‘E’ or coloured GREEN or
GREEN AND YELLOW. If in doubt consult a suitably qualified electrician.
