![background image](http://html1.mh-extra.com/html/igenix/df1656/df1656_user-manual_3945579008.webp)
8
OPERATING INSTRUCTIONS
1. Plug the appliance into a suitable power socket and switch power socket on.
2. The appliance can be controlled by either the control dial or with the pull
cords.
3. To switch on using the pull cord, pull the speed pull cord, at first it will start
on the low speed, pull the same cord additional times for the desired fan
speed - once for low, twice for medium, and three times for high.
4. To switch on using the control dial simply turn the dial to the required
setting - 1 = Low, 2 = Medium and 3 = High.
5. Pull the oscillation pull cord to switch the oscillation mode on and to switch
off pull again.
Caution: The fan should always be switched off when making adjustments.
CLEANING AND MAINTENANCE
1. Switch off and remove plug from the socket.
2. Remove the front guard.
3. Wipe blades with a soft damp cloth, taking care not to alter the angle of the
blades. Allow to dry or wipe with a soft dry cloth.
4. Replace the front guard.
5. If necessary, you can use a soft brush or vacuum cleaner to remove dust
from the guards.
6. Ensure that the fan has been reassembled fully before use.
MAINS PLUG FUSE REPLACEMENT
Fuse Replacement (Class II)
Remove the fuse cover with a small flat head
screw driver. Take out the fuse and replace with a
new fuse of the same Amp. Replace the fuse cover
and push back into place.