4
CLEANING AND MAINTENANCE
MOUNTING INSTRUCTIONS
1. Check that the mains voltage complies with the voltage
stated on this product.
2. The On/Off switch is incorporated in the speed control
switch on the side of the fan.
0 - Off
I - Low Speed
II - Medium Speed
III - High Speed
3. Push the Oscillation control at top of the motor housing to turn on the oscillating function.
Pull the oscillation control up to turn it off.
4. The fan head can be adjusted up or down. To do this loosen the adjusting knob, adjust the fan to the
required angle and secure the adjusting knob again.
Warning:
The fan must be placed on a flat even surface. When you turn off the fan, switch to OFF on
the base. Switch off at the mains and remove the plug. Ensure that the fan will not be obstructed when
oscillating.
OPERATING INSTRUCTIONS
1. Turn off the fan and remove the power plug from the wall socket before cleaning.
2. Use a dry soft cloth to remove any dust from the fan.
3. If the fan is particularly dirty use a soft damp cloth and wipe dry.
4. Do not use any chemicals or detergents as they will damage the fan.
5. Ensure that water does not drip into the motor housing.
6. Store the fan in a ventilated and dry area.
1. Remove all parts from the packaging. Separate the front and rear guard.
2. Align the rear guard with the four holes on the motor then insert and tighten the position screws.
3. Slide the blade onto the shaft of the motor and tighten the securing screw onto the flat of the shaft
to secure the blade. Ensure that the blade does not touch the guards.
4. Assemble the front guard to the rear guard. Tighten the connecting screw and nut and secure
the retaining clips.
DO NOT OPERATE THIS FAN WITHOUT THE BLADE GUARD SECURELY FITTED