3
TOWER FAN AT A GLANCE
1. Take the unit out of the box, removing any packaging.
2. Place the Fan Body (2) horizontally on a flat surface and remove the nut (5).
3. Slot the rear base (4) on the base of the fan body (2) as shown in the above diagram.
4. Slot the front base (3) on to the rear base (4) and then secure into position by tightening the
base nut (5).
1.
Air outlet
2. Fan body
3. Front base
4. Rear base
5. Base nut
6. Power cord
7. Air inlet
ASSEMBLY
11. This appliance should only be used by adults.
12. Keep the appliance and its cord out of reach of children.
13. Children shall not play with the appliance.
14. Cleaning and user maintenance shall not be made by children.
15. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge.
16. Unplug the unit from the socket when not in use. Do not pull
on the cord.
17. Do not use the unit near a bath, shower, swimming pool or
anywhere it could be splashed with water.
18. Do not expose the unit to direct sunlight.
19. Do not use the unit near flammable or explosive gases.
20. Before cleaning or moving the unit, switch it off and unplug the
power cord.
21. Do not leave the unit unattended during operation.
Always unplug the power cord when not in use.
1.
7.
2.
3.
4.
5.
6.
