Igema TG32, Assembly And Operating Manual, Page: 19 / 28

19
Caution, if defects or other damage arise during dismantling, it is essential that
they are removed before the gauge is put back into operation, please contact the
customer service of your contract partner or of IGEMA GmbH.
7.7.2 Fitting
Fit mica packets with the surface marked “Wasserseite (water side)”
towards the medium!
Fit the glasses so that the marking is legible from outside!
If a mica disc pack is marked "water side",
it must be installed with the "water side"
marked side facing the medium! The
glasses must be installed in such a way
that the marking can be read from the
outside! (drawing1, item 7.1)
Grease the bolts (1) with a suitable
assembly paste. Position graphite gasket
(8/11), borosilicate glass (9), mica disc
(10) (only for TG120) and again a graphite
gasket in the lid rail in this order. Carefully
place the cover rail (4) with its contents on
the base body (12) of the indicator and
tighten the lateral set screws (7) so firmly
that they hold the indicator without external
influence. The torques and the tightening
sequence according to point 7.1 must be
ensured (see drawing).
Aufbaudarstellung der Deckelschiene
Caution
Caution