IGEL Devices
Boot Settings
4
/
5
3.
4.
5.
6.
7.
8.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
1.
2.
3.
4.
5.
Select the
Boot
tab.
Set
USB Boot
to
<ENABLED>
.
Select
Legacy > Boot Type Order
.
Select
USB
and move it to the first position using the [+] key.
Save the settings and exit.
You can continue with the
installation procedure.
UD2 (M250C)
Power up the device while pressing [Del] button repeatedly in rapid succession.
Select
SCU
.
If a password prompt is shown, enter the BIOS password.
Select the
Boot
tab.
Set
USB Boot
to
<ENABLED>
.
Save the settings and exit.
Connect the USB stick to the device.
Reboot the device while pressing the [Del] button repeatedly in rapid succession.
Select
Boot Manager
.
Select the USB stick as the boot medium and press
Enter
.
You can continue with the
installation procedure.
UD2 (D220)
Power up the device while pressing the [F2] (older devices) or [Del] (newer devices) button
repeatedly in rapid succession.
Select
SCU
.
If a password prompt is shown, enter the BIOS password.
Select the
Boot
tab.
Set
USB Boot
to
<ENABLED>
.
Save the settings and exit.
Connect the USB stick to the device.
Reboot the device while pressing the [F2] or [Del] (newer devices) button repeatedly in rapid
succession.
Select
Boot Manager
.
Select the USB stick as the boot medium and press
Enter
.
You can continue with the
installation procedure.
UD9 (TC215B)
Power up the device while pressing the [F2] button repeatedly in rapid succession.
If a password prompt is shown, enter the BIOS password.
Select the
Boot
tab.
Select
Boot Option Priorities
.
Select the entry for the USB stick and move it to the first position using the [+] key.
Summary of Contents for UD7 Series
Page 1: ...Boot Settings...