IGEL Technology GmbH
Hardware Manual IGEL UD2 / IZ2
2/11
Version 1.0
– February, 2018
Information
Copyright
This publication is protected under international copyright laws. All rights reserved. With
the exception of documentation kept by the purchaser for backup purposes, no part of
this manual – including the products and software described in it – may be reproduced,
manipulated, transmitted, transcribed, copied, stored in a data retrieval system or
translated in any form or by any means without the express written permission of IGEL
Technology GmbH.
Copyright © 2018 IGEL Technology GmbH. All rights reserved.
Disclaimer
The specifications and information contained in this manual are intended for information
use only, are subject to change at any time without notice and should not be construed
as constituting a commitment or obligation on the part of IGEL Technology GmbH. IGEL
Technology GmbH assumes no responsibility or liability for any errors or inaccuracies
that may appear in this manual, including any pertaining to the products and software
described in it. IGEL Technology GmbH makes no representations or warranties with
respect to the contents thereof and specifically disclaims any implied warranties of
merchantability or fitness for any particular purpose.
Warranty
After purchase, just register with us online, and all your IGEL thin clients UD2, UD3, UD6
and UD7 will be upgraded from a standard 2-year to a 5-year hardware warranty,
according to our end customer hardware warranty declaration, at no additional cost.
The UD Pocket, UD9, IZ2 and IZ3 series will be upgraded to a 3-year hardware warranty.
The warranty upgrade does not cover any additional hardware options.
Find further information on our website under
https://www.igel.com/product-warranty
IGEL is a registered trademark of IGEL Technology GmbH. All hardlware and software
names are registered trademarks of the respective manufacturers. Errors and omissions
excepted. Subject to change without notice.
IGEL Technology GmbH
Hanna-Kunath-Str. 31
28199 Bremen, Germany
Tel.: +49 421 52094 0
Fax: +49 421 52094 1499
[email protected]
Hardware Reference
IGEL UD2 / IZ2 (IGEL-D220)
Document Version 1.0 – February, 2018
