1. Place RetroRadio in well ventilated position, and
make sure to leave 10 cms space between it and
the surroundings.
2. Don’t use any oil, solvent, volatile liquid or
chemical to clean the radio and recorder. Avoid
high temperature (over 60
Centigrade) or too low temperature.
3. When pulling out the plug from AC socket, please
hold the socket rather then just pulling the AC
cord to avoid any internal wire damage. Cut off
the electricity before cleaning
the radio.
4. Place RetroRadio in stable and flat level position.
5. Do not place anything on the top of unit.
1. All the voltage must comply with specification
required to hear.
2. Any higher or lower voltage will damage the radio,
which does not fall in the replacement terms.
Information Before Using
Warning
