Alarm Setting
*
Under normal mode, press “MODE”, switch to AL1 or AL2
display:
*
AL1 default time 6:00am, AL2 default time 0:00am
*
Under AL1 Mode, press and hold “MODE” for some
seconds to enter AL1 setting.
*
*
Setting item twinkling at 1HZ frequency.
*
*
settings screen saving the changes.
*
AL2 setting is the same as AL1 setting.
Alarm on/off
*
Under time mode, press “MODE” to AL1 mode
*
Under AL1 or AL2 mode, press “ ” to turn on/off the
alarm in sequence:
*
When alarm is set and when it is time, the device will
play the alarm. During the alarm, Press “SNOOZE” key to
turn on snooze, the symbol and corresponding alarm
will be twinkling all the time, press any other key to stop
Summary of Contents for iG-1043
Page 11: ......
