iGadgitz NC-600, User Manual

Page: 10 / 18

9
and follow the steps below:
a) Press and hold the MFB for about 4 seconds until the
Bluetooth LED indicator flashes alternately between green
and red. Now the NC-600 will enter into pairing mode.
b) Enable searching of nearby Bluetooth devices on your
tablet or smartphone.
c) Once the “NC-600” is found, you can now connect and
pair. If your device prompts you for a password, please
use “0000”. For more details, please refer to your device’s
owner manual.
d) When pairing is successful, the Bluetooth LED indicator
will flash green every 5 seconds. If pairing is unsuccessful,
please turn off the NC-600 headphones and repeat the
pairing steps. You may need to disable and re-enable
the Bluetooth on your mobile or tablet device. If problems
persist restart your mobile or tablet device.
After initial pairing is established, the headphones will automatically
reconnect to the last paired device when NC-600 is switched on.