Page
4
of
6
How to use AJ-65C
Turn on the speaker
When the speaker is off slide the switch on the bottom of the speaker to the On
position. The blue LED light will turn on.
Turn off the speaker
When the speaker is on, slide the switch on the bottom of the speaker to the Off
position.
Paring
Pairing is the process of establishing encrypted link between AJ-65C and Bluetooth
devices.
Step-1
Make sure the AJ-65C is switched off, then slide the switch on the bottom of
the speaker to the On position. The LED light will flash quickly green and blue if it is
searching for new devices to pair with.
Step-2
Follow the operating instruction of your Bluetooth device to start the pairing
process. Typically, this is done by going to a “Connect” or “Setup” menu and then
selecting the option to search for AJ-65C that is still in the pairing mode.
Step-3
The mobile will find AJ-65C and ask whether you are willing to connect your
device with the speaker. Press “Yes” or “Confirm” to confirm this action.
Step-4
Your device’s display might then prompt you for a passkey or PIN. Enter
0000 (a sequence of four zeros) and the display should prompt the pairing result.
If the connection is successful, the LED will flash every 2 seconds. If the pairing is
unsuccessful, please turn off the speaker and turn it on again. Then, return to
Step-1 and do the pairing procedure again.
Make a Call
Step-1
Use the mobile phone’s keypad to dial the phone number.
Step-2
Press mobile phone’s “Send” or “OK” key. The mobile phone initiates the call
and transfer the call from the mobile phone to the speaker.
Answer a Call
Step-1
If there is an incoming call while you are listening to the streaming music,
you will hear your ring tone through the speaker.
Step-2
Just press Play/Pause/M key one time.
End a Call
Use either of the following methods to end a call.
Method-1
Press Play/Pause/M key one time to end a call from the speaker.
Method-2
End a call from the mobile phone’s keypad.
If you are listening to music when there is an incoming call the speaker will switch
the connection from the music player (A2DP) to the mobile phone (HSP or HFP); the
streaming music will be paused temporarily. After you end the call, the music will
should be played and streamed to the speaker again.
Notes: When you press Play/Pause/M key to answer or end a call, please
just press one time. Do not press and hold.
